Local engineering consultancy Energy3 delivers ZX Lidars to wind farm developer for wind resource campaigns.
RES (Renewable Energy Systems), a leader in the development, engineering, and construction of wind, solar, transmission, and energy storage projects globally has confirmed that a fleet of Lidars have been deployed in Australia in support of wind farm development in the country.
RES has been developing renewable energy in Australia since 2004 and has more than 800MW of installed or under construction wind projects. The company were supported by New Zealand-based wind engineering consultancy Energy3 who provided expert advice and on-the-ground services for the Lidars.
“The ZX 300 wind Lidars supplied by ZX Lidars are being used as both a sole wind measurement sensor but also to enhance met mast installations” confirmed Llion Parry, Development Project Manager at RES. “Lidars provide great coverage at a range of measurement heights, combined with their leading accuracy at these remote, often complex sites.”
ZX Lidars provides vertical and horizontal profiling wind Lidar to accurately measure wind conditions remotely and ahead of their installed position. These accurate, independent wind measurements are a cornerstone in the development, construction and operation of wind farms globally.
RES (Renewable Energy Systems) is a global business with over 35 years of experience in renewable energy and has deployed over 16 GW of utility scale projects across wind, solar and battery energy storage around the world and manages over 3 GW of assets globally. RES has been active in Australia for 15 years and has to date successfully developed over 1 GW of clean energy projects. For more information, visit www.res-group.com
About ZX Lidars (formerly ZephIR Lidar)
ZX Lidars provides industry-leading wind lidar products, ZX 300, ZX 300M and ZX TM for wind energy and meteorological applications. These Lidars deliver accurate wind measurements in both onshore and offshore applications at measurement heights / ranges across the full swept area of the blades of modern wind turbines, and beyond. With more than 10 million hours of operation in the field and over 1000 deployments (and counting), ZX Lidars has pioneered the use of Lidar in the wind industry. The company is proud of the many world firsts it has achieved with customers including: upwind measurements from a turbine nacelle, turbine wake studies, offshore deployments of both fixed and floating wind lidar, an industry-accepted validation process, re-financing and re-powering of a wind farm, successful demonstration of measurement accuracy in a wind tunnel and total wind project financing from a lidar without need for a met mast.